I have a Kenmore washing machine. When I am filling the machine with water and lift the lid to put clothes in, the lid hits the master/main dial and the water shuts off. I then have to pull the dial out again to continue the fill. Lately, I have been putting something between the lid and the dial panel so it won't close. Is there something I can adjust?
Washing machine and dials
| Author | Comment | ||
|---|---|---|---|
 barkeydoodle |
Washing machine and dials |
Lead | |
|
Posts: 1 (07/19/08 05:40:10) |
|
||
|
appliguy |
|||
|
Posts: 5796 (07/19/08 10:07:15) Administrator |
Hi,
Model#? Kenmore is made by other companies.... http://www.applianceaid.com/model.html http://www.applianceaid.com/searscodes.html Some model# helps. |
||
|
barkeydoodle |
|||
|
Posts: 2 (07/19/08 11:24:49) |
Model # - Sorry about that - Kenmore Elite Model 11022952100
|
||
|
appliguy |
|||
|
Posts: 5799 (07/19/08 15:50:41) Administrator |
110.22952100A Whirlpool built Kenmore. Direct drive style. When I am filling the machine with water and lift the lid to put clothes in, the lid hits the master/main dial and the water shuts offMake sure the lid hinge screws are tight. Make sure the hinge bumper ( #18 ) has not fallen off, make sure the hinges themselves ( #15&16 ) have not bent allowing the lid to come back to far. The hinge bumper contacts the underneath of the top panal to stop the lid from moving any further. Picture referance is linked here. Access help... http://www.applianceaid.com/procedures.html jeff.
Last Edited By: appliguy
07/19/08 15:54:20.
Edited 3 times.
|
||
